FRPK 2-8 CONVENTIONAL REPEATER PANELS

FRPK2-8The FPRK Repeater is compatible with all FCPK 2-8 control panels which have operating software version V2.0 or above.

Repeaters are available with 2 , 4 o r 8 zones and in mains powered (K versions) or 24V powered (E versions). Mains powered repeaters require only a two core data cable from the main control panel. 24V DC versions require an additional two cores for power either from the main panel or from another 24V DC source. A mixture of Repeaters or Ancillary boards up to a maximum of 7 of each type can be connected to a control panel and each is allocated an address from 1 to 7 using a binary coded DIL switch. The total length of the data cable from the main panel to the last repeater must not exceed 1200 metres. Each Repeater has the additional of a common Fault contact as well as a common Fire Relay.

FPG-Control-Equipment

LITERATURE

FEATURES

  • Size – 385mm(W) x 310mm(H) x 90mm(D)
  • Construction – 1.2mm mild steel
  • Colour – BS 00 A 05 (grey texture) – lid & box Ral 7047 (light grey) – controls plate
  • Supply voltage (K models) – 230V AC (+10%/-15%)
  • Supply voltage (E models) – 20-30V DC
  • Mains supply fuse – 1.6A 250V
  • Power supply DC rating – 24V 1 Amps
  • Maximum battery size – 7Ah 12V (2 per panel)
  • Fault contact rating – 30V DC 1 Amp
  • Fire contact rating – 30V DC 1 Amp
  • Cable capacity – 2.5mm• per terminal
  • Operating temperature – -5°C to +50°C
  • Operating humidity – <95% (non condensing)