ES103 ELECTRONIC FIRE ALARM SOUNDER
This sounder has been fully approved to EN 54-Part 3 by the LPCB and VdS on tones 1, 8, 11, 25 and 27.
All the standard features are retained including the facility to select from three volume settings via the DIL switch. This allows individual sounders to be retro-converted to high output devices where additional sound output is required.
Tones are selected via the DIL switch on the PCB. By using 3-wires, a second stage alarm may be switched so that the second tone will over-ride the selected tone.
Standard with all ES103 products is a universal locking system. Utilising an industry standard grub screw, each ES103 product may be locked in place, making ES103 fully compliant with the latest requirements of British and European standards.
Quick fit mounting is achieved by the bayonet fixing arrangement on each base and is standard on both base variants. The deep mounting base features a throw-away cover plate for surface mount wiring. This is kept in place when wiring directly through into the rear of the product.
LITERATURE
FEATURES
- Low current Sounder technology
- 32 tones available
- Tones match FS101
- Sounder Beacon
- Available with a Deep Back Box
SPECIFICATION | ES103 ELECTRONIC SOUNDER |
---|---|
Sounder Low current mode/ Sound Output @ 1m | 9mA @86 dBA |
Sounder Med current mode/ Sound Output @ 1m | 18mA @101 dBA |
Sounder High current mode/ Sound Output @ 1m | 36mA @106 dBA |
Voltage Range | 18-35 VDC |
Frequency Range | 440Hz to 2900Hz |
Number of Tones | 32 |
IP Rating | IP 21C |
Operating Temp. Range | -20°C to + 70°C |
Maximum Humidity | 95%RH – Non Condensing (at 40°C) |
Case Material | ABS |
Diameter | 93.6mm |
Height with Base | 84.3mm (101.6mm Deep Back Box) |
Base Fixing Centers | 48mm through to 74mm |
Weight | 200g |