AECP9The AECP9 is a Manual Break Glass Call Point, which is fully compatible with Hochiki’s ESP analogue addressable protocol.

The AECP9 incorporates a red LED mounted on the front cover, which flashes with communications polling and is continuously lit when the AECP9 is operated. Once operated the Call Point produces a high level ESP interrupt, which allows the control panel to respond very quickly. A built in test function initiated by the control panel ensures the integrity of the device at all times and the device can be tested without breaking the glass by insertion of a test key in the under side of the unit. Two non-polarised flying leads are provided for easy connection to the loop wiring via the back box terminals.

The unit is addressed using DIL switches for quick and reliable addressing and the unit can also be flush mounted if required, a non-frangible glass element can also be fitted to the AECP9 if required.

  • Single Loop Address
  • Loop powered
  • Fast Response
  • Surface or Flush mounting
  • Integral Short-Circuit Isolator
  • Non-Frangible Element Fitted as Standard (conforms to EN54)
Ordering CodeAECP9, AECP9/S (surface)
Operating VoltageLoop 17-41 Vdc
Quiescent Current350μ A (max), 250μ A (typ)
Module Current consumption active5mA
Transmission MethodDigital Communications Using ESP
Operating Temp. Range-10°C to + 50°C
Storage Temp. Range-30°C to + 70°C
Ingress Protection RatingIP24
Weight / Dimensions161g / 89W x 93H x 59.5D
ApprovalsLPCB Approved to EN54